newsivl

The biggest in the world 3D print The community takes shape in TexasPerfecting a process which, according to the developer, is a cheaper option, faster and less useless for the traditional construction of houses process.

Last summer, an icon robotic printer has finished printing the last houses Wolf ranchA community of Georgetown, Texas, just at the bottom of the Austin road.

Now residents are settling in their concrete and delusional homes on sustainability and safety.

“I feel more safe in this house than any house in which I have lived, because it is so well builtIt will not burn, ”said Holly Feekings, who lives in his house in Wolf Ranch, in CNBC, at CNBC.

Avant-garde development is a collaboration project between Lennar, the second largest manufacturer of houses in the United States, and ICONA 3D technological company.

Icon, reports Reuters, started Print walls for the community In 2022, starting with only two 40 -foot robot printers. By 2023, 11 machines worked 24 hours a day, seven days a week, to produce two houses per week.

Get daily national news

Get the best news of the day, the titles of political, economic and current affairs, delivered in your reception box once a day.

Compared to traditional construction, the company says that 3D print houses are faster, less expensive, require fewer workers and minimizes building materials.

“This brings a lot of efficiency to the commercial market,” said the main icon project project, Conner Jenkins last summer. “So where there were perhaps five different teams to build a wall system, we have now A crew and a robot. “”

The walls of each house are made from a mixture of concrete powder, sand, water and additives which are added to the printer, then pumped through a nozzle, adding a layer on a layer and building the wall.

Although the process looks like a tight toothpaste from a tube, the end product gives the walls the appearance of the ribbed velvet fabric.

Lennar offers eight different models on the floor, three and four bedrooms and each house is solar energy, which means that electricity bills are shocking for those who live there – Feekings told CNBC that its electricity bill cost only $ 26 US last month.

The concrete design of the walls also maintains the houses in the fridge in the exhausting summer heat of Texas and hot when cooler temperatures settle in the fall.

The only part of the houses that is not printed in 3D is the metal roof.

“We have a lasting product here that if you look at its wind resistance for hurricanes, its fire resistance for areas worn out by fire – the ability to adapt modern products to what we need for the future in housing and the construction of a healthier housing market, told CNBC Stuart Miller, President and C -CDE of Lennar, CNBC.

Houses in Wolf Ranch start around US $ 400,000 (around $ 575,000 C) and are delivered with solar panels and smart home technology, manufacturers say that owners help save more on public service bills.

Miller told CNBC that his business now provided for a second 3D printed community in Texas, but this time, she will include double the number of structures, larger houses and will be even more affordable.

1:54
Edmonton Woman, 21, developing a 3D printer for space and working for NASA

Previous video

Next video

& Copy 2025 Global News, A Division of Corus Entertainment Inc.

The biggest in the world 3D print The community takes shape in TexasPerfecting a process which, according to the developer, is a cheaper option, faster and less useless for the traditional construction of houses process.

Last summer, an icon robotic printer has finished printing the last houses Wolf ranchA community of Georgetown, Texas, just at the bottom of the Austin road.

Now residents are settling in their concrete and delusional homes on sustainability and safety.

“I feel more safe in this house than any house in which I have lived, because it is so well builtIt will not burn, ”said Holly Feekings, who lives in his house in Wolf Ranch, in CNBC, at CNBC.

Avant-garde development is a collaboration project between Lennar, the second largest manufacturer of houses in the United States, and ICONA 3D technological company.

Icon, reports Reuters, started Print walls for the community In 2022, starting with only two 40 -foot robot printers. By 2023, 11 machines worked 24 hours a day, seven days a week, to produce two houses per week.

Get daily national news

Get the best news of the day, the titles of political, economic and current affairs, delivered in your reception box once a day.

Compared to traditional construction, the company says that 3D print houses are faster, less expensive, require fewer workers and minimizes building materials.

“This brings a lot of efficiency to the commercial market,” said the main icon project project, Conner Jenkins last summer. “So where there were perhaps five different teams to build a wall system, we have now A crew and a robot. “”

The walls of each house are made from a mixture of concrete powder, sand, water and additives which are added to the printer, then pumped through a nozzle, adding a layer on a layer and building the wall.

Although the process looks like a tight toothpaste from a tube, the end product gives the walls the appearance of the ribbed velvet fabric.

Lennar offers eight different models on the floor, three and four bedrooms and each house is solar energy, which means that electricity bills are shocking for those who live there – Feekings told CNBC that its electricity bill cost only $ 26 US last month.

The concrete design of the walls also maintains the houses in the fridge in the exhausting summer heat of Texas and hot when cooler temperatures settle in the fall.

The only part of the houses that is not printed in 3D is the metal roof.

“We have a lasting product here that if you look at its wind resistance for hurricanes, its fire resistance for areas worn out by fire – the ability to adapt modern products to what we need for the future in housing and the construction of a healthier housing market, told CNBC Stuart Miller, President and C -CDE of Lennar, CNBC.

Houses in Wolf Ranch start around US $ 400,000 (around $ 575,000 C) and are delivered with solar panels and smart home technology, manufacturers say that owners help save more on public service bills.

Miller told CNBC that his business now provided for a second 3D printed community in Texas, but this time, she will include double the number of structures, larger houses and will be even more affordable.

1:54
Edmonton Woman, 21, developing a 3D printer for space and working for NASA

Previous video

Next video

& Copy 2025 Global News, A Division of Corus Entertainment Inc.

The biggest in the world 3D print The community takes shape in TexasPerfecting a process which, according to the developer, is a cheaper option, faster and less useless for the traditional construction of houses process.

Last summer, an icon robotic printer has finished printing the last houses Wolf ranchA community of Georgetown, Texas, just at the bottom of the Austin road.

Now residents are settling in their concrete and delusional homes on sustainability and safety.

“I feel more safe in this house than any house in which I have lived, because it is so well builtIt will not burn, ”said Holly Feekings, who lives in his house in Wolf Ranch, in CNBC, at CNBC.

Avant-garde development is a collaboration project between Lennar, the second largest manufacturer of houses in the United States, and ICONA 3D technological company.

Icon, reports Reuters, started Print walls for the community In 2022, starting with only two 40 -foot robot printers. By 2023, 11 machines worked 24 hours a day, seven days a week, to produce two houses per week.

Get daily national news

Get the best news of the day, the titles of political, economic and current affairs, delivered in your reception box once a day.

Compared to traditional construction, the company says that 3D print houses are faster, less expensive, require fewer workers and minimizes building materials.

“This brings a lot of efficiency to the commercial market,” said the main icon project project, Conner Jenkins last summer. “So where there were perhaps five different teams to build a wall system, we have now A crew and a robot. “”

The walls of each house are made from a mixture of concrete powder, sand, water and additives which are added to the printer, then pumped through a nozzle, adding a layer on a layer and building the wall.

Although the process looks like a tight toothpaste from a tube, the end product gives the walls the appearance of the ribbed velvet fabric.

Lennar offers eight different models on the floor, three and four bedrooms and each house is solar energy, which means that electricity bills are shocking for those who live there – Feekings told CNBC that its electricity bill cost only $ 26 US last month.

The concrete design of the walls also maintains the houses in the fridge in the exhausting summer heat of Texas and hot when cooler temperatures settle in the fall.

The only part of the houses that is not printed in 3D is the metal roof.

“We have a lasting product here that if you look at its wind resistance for hurricanes, its fire resistance for areas worn out by fire – the ability to adapt modern products to what we need for the future in housing and the construction of a healthier housing market, told CNBC Stuart Miller, President and C -CDE of Lennar, CNBC.

Houses in Wolf Ranch start around US $ 400,000 (around $ 575,000 C) and are delivered with solar panels and smart home technology, manufacturers say that owners help save more on public service bills.

Miller told CNBC that his business now provided for a second 3D printed community in Texas, but this time, she will include double the number of structures, larger houses and will be even more affordable.

1:54
Edmonton Woman, 21, developing a 3D printer for space and working for NASA

Previous video

Next video

& Copy 2025 Global News, A Division of Corus Entertainment Inc.